Have you just unboxed your shiny new Bose QC35 II headphones, or perhaps you're looking to reconnect them to your iPad for an immersive audio experience? You've come to the right place! Connecting your Bose QC35 II to your iPad is a straightforward process, but a few simple steps ensure a smooth and successful pairing. Let's dive in and get you enjoying that legendary Bose sound in no time!
How to Connect Bose QC35 II Headphones to Your iPad: A Step-by-Step Guide
This guide will walk you through the entire process, from preparing your headphones to confirming the connection, and even some troubleshooting tips.
Step 1: Prepare Your Bose QC35 II Headphones for Pairing
The first and most crucial step is to get your headphones into "pairing mode" so your iPad can discover them.
Sub-heading: Powering On and Activating Bluetooth Pairing
- Locate the Power Switch: On the right ear cup of your Bose QC35 II headphones, you'll find a three-position power switch.
- Turn On Your Headphones: Slide the power switch to the "On" position (the middle position). You should hear a voice prompt announcing the battery level.
- Enter Pairing Mode: Now, slide the power switch all the way to the right (towards the Bluetooth symbol) and hold it there for about 2-3 seconds. Don't just flick it; hold it!
- You'll hear a voice prompt say, "Ready to pair" or "Ready to connect."
- The Bluetooth indicator light (a small LED near the power switch) will start blinking blue. This signifies your headphones are actively looking for a device to connect with.
Step 2: Prepare Your iPad for Connection
Now that your Bose headphones are ready, let's get your iPad on the same page.
Sub-heading: Enabling Bluetooth on Your iPad
- Open Settings: On your iPad's home screen, tap the "Settings" app icon (it looks like a gear).
- Navigate to Bluetooth: In the Settings menu, you'll see a list of options on the left-hand side. Tap on "Bluetooth."
- Turn on Bluetooth: If the Bluetooth toggle switch is currently off (grey), tap it to turn it on (it will turn green).
Sub-heading: Scanning for Devices
Once Bluetooth is enabled, your iPad will automatically start scanning for nearby Bluetooth devices. You'll see a section titled "Other Devices" where available devices will appear.
Step 3: Initiate the Pairing Process
This is where the magic happens! You'll now tell your iPad to connect to your Bose headphones.
Sub-heading: Selecting Your Bose QC35 II
- Look for "Bose QC35 II": In the "Other Devices" list on your iPad, you should see "Bose QC35 II" appear. Be patient; it might take a few seconds.
- Tap to Connect: Once you see it, tap on "Bose QC35 II."
Sub-heading: Confirming the Connection
- Your iPad will attempt to connect.
- You will hear a voice prompt from your Bose QC35 II headphones saying, "Connected to [Your iPad's Name]" (e.g., "Connected to John's iPad").
- On your iPad, "Bose QC35 II" will move from the "Other Devices" list to the "My Devices" list, and its status will change to "Connected."
- The Bluetooth indicator light on your headphones will stop blinking and glow a solid white (or sometimes blue, depending on the model and firmware, but it will be solid).
Congratulations! Your Bose QC35 II headphones are now successfully connected to your iPad. You can now enjoy your music, podcasts, movies, or anything else with the superior audio quality and noise cancellation of your Bose headphones.
Step 4: Using the Bose Connect App (Optional but Recommended)
While not strictly necessary for basic pairing, the Bose Connect app offers additional features and control over your QC35 II headphones.
Sub-heading: Downloading and Setting Up the App
- Download the App: Go to the Apple App Store on your iPad and search for "Bose Connect." Download and install the app.
- Open the App: Launch the Bose Connect app.
- Follow On-Screen Prompts: The app will guide you through adding your QC35 II headphones. It should automatically detect your connected headphones.
- Explore Features: Within the app, you can:
- Manage multiple Bluetooth connections (your QC35 II can connect to two devices simultaneously).
- Adjust noise cancellation levels (if applicable to your specific QC35 II firmware).
- Update headphone firmware.
- Personalize settings and access tips.
- Rename your headphones.
Step 5: Troubleshooting Common Issues
Sometimes, things don't go exactly as planned. Here are some quick fixes for common pairing problems.
Sub-heading: If Your Headphones Don't Appear in the List
- Ensure Pairing Mode is Active: Double-check that the Bluetooth indicator on your QC35 II is blinking blue. If not, repeat Step 1.
- Move Closer: Make sure your headphones and iPad are within close proximity (within 30 feet or 9 meters) of each other.
- Turn Bluetooth Off and On Again: On your iPad, toggle Bluetooth off and then on again in the Settings app.
- Restart Your iPad: A simple restart can often resolve minor connectivity glitches.
- Clear Paired Devices on Headphones: If you've connected your QC35 II to many devices in the past, it might help to clear its Bluetooth memory. To do this, slide the power switch to the Bluetooth symbol and hold it there for about 10 seconds. You'll hear a voice prompt confirming that the device list has been cleared. Then, try pairing again from Step 1.
Sub-heading: If Connection Drops Frequently
- Check Battery Levels: Ensure both your headphones and iPad have sufficient battery charge. Low battery can sometimes affect Bluetooth stability.
- Reduce Interference: Try moving away from other Wi-Fi routers, microwaves, or other electronic devices that might cause interference.
- Update Firmware: Use the Bose Connect app to check for and install any available firmware updates for your QC35 II headphones. Updates often include bug fixes and performance improvements.
10 Related FAQ Questions
How to check the battery level of my Bose QC35 II?
You can check the battery level by sliding the power switch to the "On" position; a voice prompt will announce the battery percentage. You can also view it in the Bose Connect app or on your iPad's Bluetooth settings (next to the device name).
How to connect my Bose QC35 II to a second device?
The Bose QC35 II can connect to two devices simultaneously. To connect a second device, follow the same pairing steps on the new device (Steps 1-3). Your headphones will announce "Connected to [Device 1] and [Device 2]". You can switch between playing audio by pausing one device and playing on the other.
How to switch between connected devices on Bose QC35 II?
To switch between devices that are already paired, pause audio on the currently playing device, and then start playing audio on the other connected device. Your headphones will automatically switch. Alternatively, briefly slide the power switch to the Bluetooth symbol and release; a voice prompt will announce the connected devices, and you can repeat to cycle through them.
How to reset my Bose QC35 II headphones?
To perform a soft reset, connect your headphones to a power source via the USB cable for at least 5 seconds, then disconnect the cable and wait for at least 1 minute before turning them back on. This can resolve minor issues.
How to update the firmware on my Bose QC35 II?
Download the Bose Connect app on your smartphone or tablet. Connect your headphones to the app, and the app will notify you if any firmware updates are available. Follow the in-app instructions to install the update.
How to use the Bose Connect app with my QC35 II?
Once your headphones are paired with your iPad, download and open the Bose Connect app. The app should automatically detect your headphones, allowing you to manage connections, adjust noise cancellation, access product tips, and update firmware.
How to know if my Bose QC35 II is in pairing mode?
The Bluetooth indicator light on the right ear cup will be blinking blue, and you will hear a voice prompt saying "Ready to pair" or "Ready to connect."
How to clear the paired device list on my Bose QC35 II?
Slide the power switch all the way to the Bluetooth symbol and hold it for approximately 10 seconds. You'll hear a voice prompt confirming that the Bluetooth device list has been cleared. This is useful if you're having trouble connecting to a new device.
How to answer calls with my Bose QC35 II?
When a call comes in, you can answer it by pressing the multi-function button (the large button on the right ear cup) once. Press it again to end the call.
How to control volume on my Bose QC35 II?
Use the volume up (+) and volume down (-) buttons located on the right ear cup of your headphones to adjust the audio volume.
