Of course! Let's get you set up to play Valorant without any issues. The "Vanguard requires TPM 2.0 and Secure Boot" error can be frustrating, but don't worry, we'll walk through it step-by-step. Let's start with a quick check to see if your system has what it takes.
Step 1: The Initial System Check - Let's See What You're Working With!
Before we dive into the BIOS, let's confirm if your PC has a Trusted Platform Module (TPM) 2.0 and if Secure Boot is enabled. It's a quick and easy process.
Check for TPM 2.0:
Press the Windows key + R to open the "Run" dialog box.
Type
tpm.mscand hit Enter.A new window will pop up. If you see a message that says "The TPM is ready for use", you're in good shape!
Now, look under "TPM Manufacturer Information" and check the "Specification Version." For Vanguard, this needs to be 2.0.
If you see a message saying "Compatible TPM cannot be found" or a version less than 2.0, your hardware might not support it, or it's simply disabled. Don't panic just yet! We'll address this in the next steps.
Check the Secure Boot State:
Press the Windows key + R again to open the "Run" dialog box.
Type
msinfo32and hit Enter.The System Information window will appear. In the left-hand panel, make sure "System Summary" is selected.
In the right-hand pane, look for "BIOS Mode" and "Secure Boot State."
For Vanguard to work, the BIOS Mode should be UEFI, and the Secure Boot State should be On.
If your BIOS Mode is "Legacy" or "CSM," or your Secure Boot State is "Off" or "Unsupported," you'll need to make some changes in your BIOS.
If both of these checks pass with flying colors, you should be good to go. If not, follow the next steps to enable them.
 |
| How To Enable Vanguard Tpm 2.0 |
Step 2: Entering the BIOS/UEFI Settings
This is where we go under the hood of your computer. The BIOS (Basic Input/Output System) or UEFI (Unified Extensible Firmware Interface) is the firmware that starts up before Windows. We need to access it to change the settings.
Restart and Press the BIOS Key:
First, save all your work and close all applications.
Restart your computer.
As your PC boots up, you need to repeatedly press a specific key to enter the BIOS. This key varies depending on your motherboard or laptop manufacturer.
Common keys include F2, F10, F12, or Delete. For many gaming PCs and laptops, it's often Delete or F2. You can usually see a message on the boot screen like "Press DEL to enter Setup" or "Press F2 to enter BIOS."
If you miss it, just restart and try again. Don't give up!
Alternative Method (from Windows):
Go to Settings > Update & Security > Recovery.
Under "Advanced startup," click "Restart now."
After the PC restarts, select Troubleshoot > Advanced options > UEFI Firmware Settings > Restart. This will take you directly to the BIOS.
Step 3: Enabling UEFI Boot Mode (if needed)
Secure Boot only works in UEFI mode. If your PC is currently in "Legacy" or "CSM" mode, you must switch it.
QuickTip: Check if a section answers your question.
Navigate to the Boot Configuration:
Once you're in the BIOS, use your keyboard's arrow keys to navigate the menus. The mouse may not work here.
Look for a section or tab named "Boot," "Boot Configuration," or something similar.
Find the "Boot Mode" or "OS Type" setting.
Change the setting from "Legacy" or "CSM" to "UEFI."
Be aware that changing this setting might require you to reinstall Windows if your current installation is not in UEFI format. However, for most modern systems, this should not be an issue.
Step 4: Enabling TPM 2.0 (The Star of the Show!)
This is the core of the fix for the Vanguard error. The TPM setting can have different names depending on your CPU manufacturer.
Find the Security or Advanced Tab:
In the BIOS, navigate to the "Security" or "Advanced" tab.
Look for an option related to "Trusted Computing," "Security Device Support," or "TPM Device."
Enable TPM for your CPU Type:
For Intel CPUs: Look for a setting called "Intel Platform Trust Technology" or "PTT." Make sure it is Enabled.
For AMD CPUs: Look for "AMD fTPM switch" or just "fTPM." Ensure it is Enabled.
If you can't find these options, check for a general "Security Device Support" and enable that.
 |
Step 5: Enabling Secure Boot (The Final Piece)
Now that we're in UEFI mode and have TPM enabled, let's enable Secure Boot.
Locate the Secure Boot Option:
Navigate to the "Boot" or "Security" section in your BIOS.
Find the "Secure Boot" option.
Change its setting from "Disabled" to "Enabled."
Important Note on Secure Boot Mode:
On some motherboards, you might see a "Secure Boot Mode" option. Change it from "Custom" to "Standard."
You may also need to "Clear Secure Boot Keys" and then "Restore Secure Boot to Factory Defaults." This can sometimes resolve lingering issues.
Step 6: Save and Exit
You're almost there! Don't forget to save your changes.
Save and Exit the BIOS:
Look for a tab or option that says "Save & Exit," "Exit Saving Changes," or something similar.
The key for this is often F10.
Confirm that you want to save the configuration and exit.
Your computer will restart.
After your PC restarts, it should boot up normally, and you can now launch Valorant. The Vanguard error should be gone! If you still face issues, you might need to update your BIOS firmware or check for compatibility issues, but for most users, these steps are all you'll need.
Tip: Share one insight from this post with a friend.
10 Related FAQ Questions
How to check if my PC supports TPM 2.0?
You can check by pressing Win + R, typing tpm.msc, and checking the "Specification Version." You can also check in Device Manager under "Security devices" for "Trusted Platform Module 2.0."
How to check if Secure Boot is enabled?
Press Win + R, type msinfo32, and look for "Secure Boot State" in the System Summary. It should say "On."
How to find my BIOS key?
QuickTip: Take a pause every few paragraphs.
The BIOS key is displayed on the screen during the initial boot-up process. Common keys are F2, F10, F12, and Delete. You can also check your motherboard or laptop manufacturer's website.
How to change from Legacy BIOS to UEFI?
You can change this in your BIOS settings, usually under the "Boot" or "Boot Configuration" tab. Look for "Boot Mode" or "OS Type" and select "UEFI."
How to enable TPM on an Intel CPU?
In your BIOS, look for the "Intel Platform Trust Technology" or "PTT" setting, often in the "Security" or "Advanced" tab, and enable it.
How to enable fTPM on an AMD CPU?
In your BIOS, look for the "AMD fTPM switch" setting, usually in the "Security" or "Advanced" tab, and enable it.
Tip: Take a sip of water, then continue fresh.
How to fix the Vanguard error if my hardware doesn't support TPM 2.0?
If your hardware is too old and doesn't support TPM 2.0, you may be out of luck as it is a mandatory requirement for Vanguard on Windows 11. You can try disabling Virtualization-based Security (VBS) on Windows 10, but this may not work for the latest versions of Vanguard.
How to update my BIOS?
Visit your motherboard or PC manufacturer's website, find your specific model, download the latest BIOS firmware, and follow their instructions for updating. This is a critical process, so be sure to follow the instructions precisely.
How to clear Secure Boot keys?
In the Secure Boot section of your BIOS, you may find an option to "Clear Secure Boot Keys" or "Reset to Setup Mode." You can then usually re-enable Secure Boot and set it to "Standard" mode.
How to check if VBS is enabled?
Search for "System Information" in the Windows Start menu, and under "System Summary," look for "Virtualization-based security." If it says "Running," it's enabled. You can disable it through Core Isolation settings in Windows Security.
 |
