Alright, ready to supercharge your home charging setup? Installing two Tesla Wall Connectors can significantly enhance your EV charging experience, allowing you to charge two vehicles simultaneously or optimize charging for a single vehicle when needed. This is a project that involves high voltage electricity, so safety is paramount. If you're not absolutely confident in your electrical abilities, please hire a certified electrician. Seriously, it's worth the peace of mind.
Step 1: Assess Your Electrical Service and Needs ⚡
Before you even think about mounting anything, let's figure out what your home's electrical system can handle. This is the most crucial step.
 |
| How To Install Two Tesla Wall Chargers |
Sub-Step 1.1: Understand Your Main Electrical Panel
Locate your main electrical panel. This is typically a grey metal box, often in your garage, basement, or utility room.
Identify your service amperage. Look for the main breaker at the top of the panel – it will have a number like 100A, 150A, or 200A. This is the maximum current your entire house can draw.
Assess available breaker space. Do you have two open double-pole breaker slots available for the new chargers? Each Tesla Wall Connector requires a dedicated 240V circuit.
Sub-Step 1.2: Perform a Load Calculation (or Get Professional Help!)
Adding two high-power chargers can put a significant strain on your electrical system.
Why it matters: Overloading your panel can lead to tripped breakers, damaged wiring, or even a fire.
What to do: A load calculation determines if your existing service has enough capacity for the additional chargers after accounting for all other household electrical demands (HVAC, appliances, lights, etc.).
Professional advice: Unless you're a qualified electrician, do not attempt this calculation yourself. This is where an electrician becomes indispensable. They can tell you if you need a service upgrade, a sub-panel, or if power-sharing capabilities of the Tesla Wall Connectors will suffice.
Step 2: Choose Your Wall Connector Setup
Tesla Wall Connectors (especially Gen 3) are designed with "Power Sharing" capabilities, which is highly recommended when installing multiple units.
Sub-Step 2.1: Power Sharing vs. Independent Circuits
Independent Circuits: This means each Wall Connector gets its own dedicated circuit and breaker. If your electrical service can handle it, this provides the fastest charging for each vehicle. For example, two 60A circuits would allow each charger to deliver 48A (80% of breaker rating) when charging individually.
Power Sharing (Group Management): This is the more common and often necessary approach for multiple Wall Connectors.
How it works: Multiple Gen 3 Wall Connectors can be wired to a single circuit (daisy-chained) or separate circuits, and then communicate wirelessly to intelligently distribute the available power among connected vehicles. One Wall Connector is designated as the "leader" and controls the power allocation to the "followers."
Benefits: Prevents overloading your main electrical panel by ensuring the combined draw never exceeds the set network limit. For instance, if you have a 60A circuit for two chargers, they could dynamically share that 60A, perhaps providing 30A to each vehicle when both are charging, or up to 48A to a single vehicle if only one is plugged in.
Recommendation: For two chargers, especially if you have limited electrical capacity, Power Sharing with Gen 3 Wall Connectors is highly recommended.
Tip: Reading on mobile? Zoom in for better comfort.
Step 3: Gather Your Tools and Materials ️
Once you've determined your setup and received professional consultation (if needed), it's time to prepare.
Tesla Wall Connectors (x2): Ensure you have the correct generation (Gen 3 for optimal power sharing).
Circuit Breakers (x2 or x1 for daisy chain): Sized according to your electrician's recommendation and local electrical codes (e.g., 60A for 48A continuous charging).
Electrical Wire: Appropriately sized for your chosen breaker and distance, e.g., 6 AWG for a 60A circuit. You'll need two hot wires (L1, L2) and a ground wire.
Conduit: To protect the wiring, especially if exposed.
Conduit Connectors and Fittings: To connect the conduit to the breaker panel and Wall Connector.
Mounting Hardware: Screws, anchors appropriate for your wall material (wood studs, concrete, etc.).
Basic Electrical Tools: Wire strippers, screwdriver set (Torx bit usually included with Wall Connector), level, tape measure, drill.
Safety Gear: Electrical gloves, safety glasses, voltage tester.
Tesla One App: Essential for commissioning the Wall Connectors.
Step 4: Physical Installation
This is where the actual mounting and wiring takes place. ALWAYS turn off the main breaker to your electrical panel BEFORE starting any wiring work.
Sub-Step 4.1: Choose Mounting Location(s)
Proximity to vehicles: Consider where your Teslas will typically park for charging.
Electrical panel proximity: Shorter wire runs are generally better and cheaper.
Height: Tesla recommends approximately 59 inches (1.5 meters) from the ground to the bottom of the Wall Connector for easy reach.
Wall surface: Ensure the wall can securely support the Wall Connector.
Sub-Step 4.2: Mount the Wall Connectors
Detach the wirebox: The Tesla Wall Connector typically comes in two parts: the wirebox and the main unit. Remove the front cover and detach the wirebox.
Mount the wirebox: Use the provided template and mounting hardware to securely attach the wirebox(es) to the wall. Ensure it's level!
Sub-Step 4.3: Wire the Wall Connectors
For Independent Circuits:
Run separate conduits and wires from your main electrical panel to each Wall Connector's wirebox.
At the electrical panel, install two new double-pole breakers (e.g., 60A each).
Connect the L1 and L2 (hot) wires to the breaker terminals.
Connect the ground wire to the ground bus bar in the panel.
At each Wall Connector, connect the L1, L2, and ground wires to the appropriate terminals within the wirebox.
For Power Sharing (Daisy Chaining - Gen 3 Only):
Run one conduit and wire from a single, appropriately sized double-pole breaker in your main panel to the first Wall Connector (the "leader").
Within the first Wall Connector's wirebox, land the incoming wires on one set of terminals.
Crucially, run another set of wires from the opposite set of terminals in the first Wall Connector's wirebox to the second Wall Connector (the "follower"). Tesla Wall Connectors are designed for this daisy-chaining.
At the second Wall Connector, connect these incoming wires to its terminals.
Ensure all connections are tight and secure according to the torque specifications in the Tesla installation manual.
Sub-Step 4.4: Reattach Main Unit and Faceplate
Once wiring is complete and double-checked, carefully reattach the main Wall Connector unit to the mounted wirebox.
Secure the faceplate.
Tip: Don’t just scroll — pause and absorb.
Step 5: Commissioning and Power Sharing Setup
This is where the "smart" part of the Tesla Wall Connector comes in, especially for power sharing.
Sub-Step 5.1: Initial Power Up
Double-check all wiring connections one last time.
Turn on the breaker(s) at your main electrical panel.
The Wall Connector(s) should power on and show a pulsing green light, indicating they are ready for commissioning. If you don't see a green light, press and hold the button on the charging handle for five seconds to prepare it.
Sub-Step 5.2: Use the Tesla One App for Commissioning
Download and open the Tesla One app. This app is for installers and is crucial for setting up the Wall Connector.
Connect to the leader Wall Connector: Scan the QR code on the QuickStart guide or the back of the first Wall Connector (your designated "leader"). This will establish a Bluetooth or Wi-Fi connection to the unit.
Enter Installation Settings: In the app, you'll specify the installation country and the breaker size that supplies power to the Wall Connector(s). This is extremely important for safety and proper operation.
Connect to Wi-Fi: Connect the leader Wall Connector to your home's 2.4 GHz Wi-Fi network. This enables firmware updates and remote management.
Sub-Step 5.3: Configure Power Sharing (Group Management)
Identify Leader and Followers: One Wall Connector will be the "leader" and manage power distribution. The others will be "followers."
Add Followers: In the Tesla One app, navigate to the "Power Sharing" or "Group Power Management" section.
Scan QR codes of followers: Scan the QR code of each additional Wall Connector to wirelessly pair them with the leader. You can pair up to five followers for a total of six Wall Connectors in a network.
Set Network Limit: This is critical. You'll set the maximum total current the entire power-sharing network is allowed to consume. This value should be 80% of the breaker rating supplying the entire network. For example, if you have two Wall Connectors on a single 60A circuit, your network limit would be 48A (0.8 * 60A). If they are on separate 60A circuits but you want to limit total draw, you'd set the network limit based on your home's overall capacity. Consult your electrician for this value.
Enable Power Sharing Network: Once all followers are added and the network limit is set, enable the power sharing network in the app.
Sub-Step 5.4: Final Verification and Tesla App Integration
Verify that all tabs in the Tesla One app show a green checkmark and that your Wall Connectors have a solid green light.
For residential customers, connect your Wall Connector(s) to the main Tesla app (the one you use for your car). This allows you to view charging history, set schedules, and monitor charging remotely.
Frequently Asked Questions (FAQs) about Tesla Wall Connector Installation
How to choose the right breaker size for a Tesla Wall Connector?
QuickTip: Go back if you lost the thread.
The breaker size depends on your desired charging speed and electrical panel capacity. For a single Wall Connector, a 60A breaker allows for the maximum 48A continuous charge. However, always consult a certified electrician to ensure it's safe for your home's electrical system.
How to daisy chain two Tesla Wall Connectors?
To daisy chain (Gen 3 only), wire the first Wall Connector to your main breaker. Then, run a second set of wires from the opposite terminals of the first Wall Connector's wirebox to the second Wall Connector's terminals. This allows them to share a single circuit.
How to set up power sharing on Tesla Wall Connectors?
Power sharing is configured through the Tesla One app. Designate one Wall Connector as the "leader" and then wirelessly pair up to five "followers" by scanning their QR codes. Finally, set the maximum network current limit in the app.
How to troubleshoot a Tesla Wall Connector that isn't charging?
First, check the Wall Connector's LED light codes for diagnostic information. Common issues include a tripped circuit breaker, loss of Wi-Fi connection, or a communication issue in a power-sharing network. Try power cycling the Wall Connector by resetting its breaker.
How to connect a Tesla Wall Connector to Wi-Fi?
You connect the Wall Connector to your home's 2.4 GHz Wi-Fi network during the commissioning process using the Tesla One app. A stable Wi-Fi connection is essential for firmware updates and power sharing.
Tip: Write down what you learned.
How to find a certified electrician for Tesla Wall Connector installation?
Tesla provides a network of certified installers. You can typically find recommendations on the Tesla website or by searching for "Tesla Wall Connector installer" in your local area. Always ensure they are licensed and insured.
How to determine if my electrical panel can handle two Tesla Wall Connectors?
A licensed electrician will perform a load calculation on your home's electrical service. This calculation determines if your existing service has enough spare capacity to safely accommodate the additional draw from two chargers.
How to update the firmware on a Tesla Wall Connector?
The best way is to connect your Wall Connector to your home's Wi-Fi network. Tesla will automatically push firmware updates over the air. If Wi-Fi is unavailable, manual updates are possible but more involved.
How to control access to my Tesla Wall Connector?
The Tesla One app allows you to configure access controls during commissioning. You can choose to allow all EVs, only Tesla vehicles, or only authorized Tesla vehicles (by VIN) to charge using your Wall Connector.
How to safely work with high voltage electricity during installation?
Always turn off the main circuit breaker to your home before attempting any electrical work. Use appropriate safety gear, including insulated tools and gloves. If you are not experienced, do not attempt to install this yourself and hire a qualified electrician.
This video provides a visual guide for daisy-chaining multiple Tesla Wall Connectors:
 |
This page may contain affiliate links — we may earn a small commission at no extra cost to you.
💡 Breath fresh Air with this Air Purifier with washable filter.
