How to Connect to Wireless Network

People are currently reading this guide.

Want to connect to wireless network on your laptop? Is your laptop not detecting wireless network at all? Your laptop not sensing your WiFi router in wireless connections? Do not worry this guide will walk you through the complete process.

Connecting to a wireless network is a simple process, you only need to know the network you want to connect to and the security key to authenticate yourself (sometimes also called the WiFi password). In another guide we have written to increase WiFi signal strength.

How to connect to a WiFi network

In order to Connect to Wireless Network follow these below steps. Before we move ahead, we need to make sure if you laptop has Wireless drivers installed or not. You can check for missing driver on your laptop in less than 2 minutes.

Click Wireless Network Icon on taskbar right corner.

You will see a list of WiFi networks.Select your network.

Mark "Connect automatically" checked.
Click on Connect button next to it.
Enter password or network security key.
Click on Connect or Next button.

If the network drop-down menu does not report on the wireless network, you can follow the steps below to deactivate and reactivate WiFi to determine whether it resolves the problem.

Disconnect from a WiFi network

We saw how to connect to Wireless Network, now we will go through the opposite process. It is pretty simple process to disconnect a wifi connection.

If you are a fan of Chrome browser and do not want Chrome to take up 100% processor power then read the tutorial for more details.

Disconnect using the drop-down menu.

The easiest way to disconnect is to use the network drop-down menu.

Click Wireless Network Icon on task bar right corner.
Choose the network you are connected to, click on it
Simply click the disconnect button.

You can also click the Wi-Fi Quick Actions button at the bottom to deactivate the adapter and disconnect from the network using the pull-down menu.

Quick tip: the same Wi-Fi button is also found in the Quick Actions section of the Service Center (Windows key + A).

If you don't choose a program, you have to activate the adapter manually by clicking the Wi-Fi button again in the drop-down menu. Also keep in mind that when using the drop-down menu, it is possible to enable or disable Airplane and Mobile Access Point modes. Here is a Wikipedia link to know more about Access Points.

Log out using the configuration application

Or, you can enable or disable Wi-Fi using the Settings application.

Open configuration
Click on Network and security.
Click on Wi-Fi.
Turn off the adapter switch that you want to disconnect.
Use the drop-down menu to select the option to activate the wireless adapter on time.

View Properties of a Wi-Fi connection

Sometimes, to solve problems or manage applications, you need to know your network hardware information, such as network tapes, IP addresses, adapter names, etc. Although there are many ways to find out this information, you can quickly identify this information, as well as other information about your wireless connection, through the Settings application.

Open configuration
Click on Network and security.
Click on Wi-Fi.
Under the wireless network, click the Hardware Properties link.

On the property page you will find information such as the SSID, protocol, type of security, channel and network channel, IP and MAC address.

Connecting automatically to Wi-Fi networks

To Connect to Wireless Network automatically you need to perform following steps. If you don't choose the option to automatically connect to the wireless network when you set up a new connection, or if you activate it, but no longer need configuration, you can consult this function to get help from the Settings application.

Open configuration
Click on Network and security.
Click on Wi-Fi next to it.
Click on your Wi-Fi connection for now.
Activate or deactivate Automatic connection when the option is within range.

Changing Network profile of a Wi-Fi connection

To improve network security, starting with Windows 10 Fall Creators updates, you can now more easily configure your wireless connection as a private network in a trusted or Public network on a network that you don't trust, such as coffee. shop or airport.

Open configuration
Click on Network and security.
Click on Wi-Fi.
Click on your Wi-Fi connection for now.
Under "Network profiles", select one of the following two options:

Public: Keep your computer safe from other devices on public networks and deactivate file and printer sharing.
Private: allows your computer to be detected by other devices on the local network and allows you to use printers and share files (if configured).

If you don't run the Windows 10 Fall Creators update, the option Make this PC that can be found will appear, which works on th

Set up a Wi-Fi Network as Metered Connection

Windows 10 offers unlimited internet access from the start to download system updates and applications, synchronize your device settings, connect to cloud services and connect to the strong Internet.

The problem is that if you use a limited Internet connection, you can verify the closing of data very quickly. The measured connection reduces the use of Windows 10 to avoid exceeding your data plan.

If you are connected to a limited data plan, you can use the Settings application to configure your wireless connection as measurable.

Open configuration
Click on Network and security.
Click on Wi-Fi.
Click on your Wi-Fi connection for now.
Under "Metered connections", enable the switch to meter it.

After these steps are complete, Windows 10 will have limited access to an Internet connection, which will also prevent you from downloading updates. However, some important updates can be downloaded through this type of connection.

Setting your WiFi connection as metered connection actually turns off automatic windows updates. This is the best part of it.

How to manage wireless services.

The Wi-Fi configuration page also offers some interesting features for users who are always on the go.

Wi-Fi service

Windows 10 offers two additional features to help you connect wherever you are. If you enable search for paid packages for recommended access points near my switch, you can purchase data packages from the Windows Store affiliate network.

In addition, you can also activate the connection to the recommended open access point switch, which allows Windows 10 to connect automatically to open wireless networks, including through landing pages, through a network database. known.

Although the use of recommended hotspots is a good choice, remember that some networks are reliable but not safe.

Access Point to network 2.0

Hotspot 2.0 is a relatively new network standard that makes it easy and safe to connect to public Wi-Fi networks.

If you are in a public place, such as a cafeteria, airport or hotel, Hotspot 2.0 will automatically identify itself and connect to the correct network without going through a list of networks that might be wrong or dangerous.

Hotspot 2.0 networks are enabled by default on Windows 10, but if you plan to use this feature, you can go to Settings> Updates and Security> WiFi to make sure it's activated. You can also check this guide for more details.

How to connect to a wireless network? Connect and share files without using a cable. This progressive reference can help you connect a Windows laptop or Macintosh laptop to a Wi-Fi network in a few simple steps.

Connect to a wireless network on older Windows

Look for the wireless network icon on your PC (under Windows). You will find an icon that looks like several computers or a collection of slides on the taskbar at the bottom right of the screen. The Mac will have a wireless symbol on the top right of the screen).
View the WiFi network that can be accessed by right-clicking the icon and selecting "View accessible wireless networks" (Windows XP) or by clicking on the icon and select "Connect or Decide". (Windows Vista) On Macintosh OS X and Windows 7 and 8, just click the Wi-Fi icon to see a list of available networks.
Select the network to be connected by clicking the "Connect" button (or just select it on Win7 / Mac).
Enter the security key. If the wireless network is encrypted (with WEP, WPA or WPA2), you will be asked to enter a password or network passphrase. This might be for you next time, so just take it once.
On Windows, choose this network type. Windows automatically manages security for various types of network locations (Home, Office or Public). Learn a lot about the types of location of this network here.
Start browsing or sharing! Now you must be connected to a WiFi network. Open your browser and visit the website to check your Internet connection.

Some Important Suggestions

Make sure you have updated firewall and antivirus software, especially if you access public WiFi hotspots. Open or unsecured wireless networks are not safe at all.
On Windows XP, make sure you have updated SP3 to have the latest WPA2 security driver.
Some wireless networks are used to cover your SSID (or network name); If you cannot find a WiFi network in your list, ask someone in this location to get SSID information.
If you are ready to connect to the network but not to the Internet, make sure your network adapter is configured to automatically get the router's IP address or try some wireless troubleshooting tips.
If you cannot get a wireless network icon, try opening the control panel (or system configuration) and then the network connection section, then right-clicking on the connection. Wireless network for "View available wireless networks". If the wireless network that you are looking for is not in the list, you can add it manually by accessing the wireless network connection properties as shown above and clicking the option to add networks. On a Mac, click the wireless icon, then "Join another network". You must enter a network name (SSID) and, accordingly, security information (for example, WPA password).

How to Connect to Wireless Network - WiFi Tutorial