How to fix WiFi does not have a valid IP configuration in Windows

People are currently reading this guide.

    Choosing a Wi-Fi network is ideal for those who prefer to connect conveniently to the Internet. It is perfect for those who want to prevent the limitations of irritating wires. It is true that Wi-Fi technology provides several advantages.

    What is Invalid WiFi IP Configuration?

    Several of the customers reported this error message: “Wi-Fi doesn’t have a valid IP configuration - unidentified network". Many have seen the same error for Ethernet connection.

    If this error message appears, the user is not connected with the Wi-Fi network successfully. It should be noted that it comes in different forms, including:

    No valid IP configuration Windows 10: Due to the security settings in your antivirus, this error message can appear. You can attempt to deactivate the security software to solve that.

    Wi-Fi doesn’t have a valid IP configuration: No internet access or no secured internet – these are some of the error message differences. However, with the solutions in this article, you can fix them.

    You do not have to worry when you try to connect to the Wifi in Windows 10 and it displays the error message "wifi doesn’t have a valid IP configuration." This is a small and basic error that has occurred due to a minimal configuration error. You must follow the steps below to remove this error message.

    Start setting your Wireless IP Address manually

    There is an IP address for each wireless network. DHCP generates the process of generating a single IP for the wireless modem. Sometimes there occurs an error in DHCP. By setting the Ip address of your modem, you can remove this error by following the steps below.

    • To select a network connection, press on the Windows Key + X. 
    • Right-click on your wireless network and from the menu select Properties.
    • Select Version 4 (TCP / IPv4) of the Internet Protocol and press the Properties button.
    • Select Use the following IP address option when the Properties window opens and enter the IP address.
    • Subnet mask and Default gateway.

    WiFi does not have a valid IP configuration
    • Click the OK button.
    • Alternatively, to assign a static IP address to your PC, you can access your router and switch off DHCP and configure it.

    Reset Your TCP or IP in Windows 10

    This is the easiest way to remove the wireless network don’t have a valid IP error. Simply use the ' netsh command prompt ' to remove this error. Follow the steps below. 
    • You can also use Windows Key + X, and then select the command prompt menu as an administrator.
    • wi-fi-valid-IP-configuration-admin
    • If your command prompts you to open, join the lines below,
    netsh winsock reset
    wi-fi-valid-ip-configuration-netsh-1
    netsh int ip reset
    wi-fi-valid-ip-configuration-netsh-2
    • Close Command Prompt and restart your PC.
    • All you have to do is connect your wireless network now, without any difficulties.
    This method can fix IP configuration problems readily. This technique is however limited to only static IP addresses. In such cases, a command prompt must be changed repeatedly. Therefore, we suggest you take another step for this valid Windows 10 IP address settings error.

    Open WiFi Network Connection using Command Prompt

    WiFi netsh winsock reset command prompt


    You can also use these orders to fix your issue here.

    ipconfig /release
    ipconfig /flushdns
    ipconfig /renew

    Change Wireless network SSID and Password in Windows 10

    Windows 10 also gives you another way to adjust the SSID and the password of the wifi, if your wifi does not have a valid IP configuration. This will create your computer like a fresh network and will likely not show an invalid IP error to your computer. In other versions of windows, this technique can also be efficient.


    Wireless Properties SSID Settings


    You must connect your mode to your PC in order to perform this technique. This can be done by connecting to Ethernet cable. You will simply be able to access it and alter the network SSID and password after effectively logging in your modem. You will use this to solve your computer's valid IP configuration error.