How to Fix KMODE Exception Not Handled Windows 10 / 8 / 8.1

People are currently reading this guide.
[New] Are you using Windows?
Want to make your computer a masterpeace?
You gotta see this. Opens in New Tab.


    The following information about this error KMODE Exception Not Handled has been retrieved from Microsoft Support.

    What is KMODE_Exception_Not_Handled

    An error message, warning, warning, and the bottom of the symptoms associated with this error.

    Error 0x0000001E

    Of error KMODE Exception Not Handled it indicates an error handler system can not capture the exceptions generated by the program in kernel mode. It is represented mainly by blue screen error (BSOD) or STOP code. When this happens, the system has shut down unexpectedly.

    Errors can be caused by any of the following:
    1. hardware problems
    2. Incompatibility with device driver
    3. the corrupt system services
    4. just installed software applications may not be compatible with the version of Windows

    Memory Module

    Common causes of most of these errors is a defective module that periodically give errors read / write. If this happens, you should scan the memory of the system and replace the defective RAM module.

    Device Drivers Corrupted

    Sometimes a device driver can be configured, damaged or worn. It also occurs after you upgrade Windows or Windows downgrade from a newer system for the elderly.

    How to fix Fix KMODE Exception in WIndows 10

    To check whether the error is caused by a defective drive, running on autopilot or update drivers manually update to the latest version.

    To update the driver, follow these steps:
    1. click Start
    2. Type devmgmt.msc in the search box
    3. Click devmgmt.msc in the results list
    4. Right-click on the controller
    5. To update the driver, select Update Driver Software.
    6. To disable the driver, select Disable.
    7. To uninstall the driver, select Uninstall.
    8. Device Manager screen
    9. Device Manager screen
    To run an update on autopilot, follow these steps:
    1. click Start
    2. Access Devices and Printers
    3. Right-click on the computer
    4. Setting the device installation Selection
    5. Select Yes, automatically
    6. Click Save Changes
    7. Follow these steps

    Error Description on Blue Screen

    If this is the first time you've seen this stop error screen, Generate your computer. If this screen appears again, follow these steps:

    1. Make sure you have enough disk space.
    2. Check with your hardware vendor to update the BIOS.

    Technical informations:

    *** STOP: 0x0000001E (0x0000001E, 0X0000001E) ***



    No comments