Programming your Verizon remote can seem like a daunting task, but with a clear, step-by-step guide, you'll be controlling your TV and other devices in no time! Whether you've just moved, replaced a remote, or simply need to re-sync, this comprehensive guide will walk you through the process. Let's get started!
Are you ready to take control of your entertainment experience?
This guide will help you program your Verizon Fios remote to seamlessly operate your TV, soundbar, and even other auxiliary devices. Say goodbye to juggling multiple remotes and hello to a simplified setup!
 |
| How Program Verizon Remote |
Step 1: Identify Your Verizon Remote Model & Target Device
Before we dive into the programming process, it's crucial to understand which Verizon remote you have and what device you're trying to program it to. Verizon offers various remote models, including the traditional IR remotes and the newer Fios TV Voice Remotes (which often use Bluetooth). The programming steps can vary slightly depending on your remote type and the device you want to control.
Sub-heading: Understanding Your Remote
Traditional IR Remotes: These remotes require a direct line of sight to the device you're controlling. They send signals using infrared light. If your remote has dedicated "TV," "DVD," and "AUX" buttons at the top, it's likely an IR remote.
Fios TV Voice Remotes (Bluetooth/RF): These are typically paired with newer Fios TV One or Fios TV One Mini set-top boxes. They use Radio Frequency (RF) technology, meaning they don't require a direct line of sight and can control devices even if they're hidden in a cabinet. They often feature a microphone button for voice commands.
Sub-heading: What Are You Programming?
Your TV: This is the most common device to program, allowing you to control power, volume, and input.
A Soundbar/Audio Receiver: If you have an external audio system, you'll want your Verizon remote to control its volume.
A DVD Player/Blu-ray Player: For those who still use physical media, controlling your player with the Fios remote is convenient.
Other Auxiliary Devices: Some remotes allow for programming of other devices, though this is less common.
Step 2: Basic Pairing for Fios TV Voice Remote (Bluetooth)
If you have a Fios TV Voice Remote and are connecting it to a Fios TV One or Fios TV One Mini, the initial pairing is often automatic or very straightforward.
Tip: Bookmark this post to revisit later.
Sub-heading: Initial Pairing for New Setups
Turn on your Fios TV One or Fios TV One Mini.
Simply pull out the plastic battery tab from the back of your new Fios TV Voice Remote. It should automatically attempt to pair with your Fios TV One.
Look for on-screen messages indicating the pairing progress.
Sub-heading: Manual Pairing/Re-pairing
If the automatic pairing doesn't work, or if you're re-pairing a remote:
Point your Fios TV Voice Remote towards the Fios TV One device.
Press and hold the Play/Pause button and the "0" (zero) button simultaneously on the remote.
Release both buttons when the blue light on the Fios TV Voice Remote starts flashing.
Wait for the blue light to stop flashing. This indicates that the remote is connected, paired, and ready for use.
If you see an on-screen prompt on your TV, follow those instructions.
Step 3: Programming Your Verizon Remote to Your TV (Using Codes)
This is the most common scenario for both IR and some Voice Remotes when controlling your TV's power, volume, and input. This method typically involves entering a 3-digit code specific to your TV brand.
Sub-heading: Method 1: Using the On-Screen Menu (Recommended for Fios TV Voice Remote)
For newer Fios TV systems, the easiest way to program your remote to your TV or audio device is often through the on-screen menu.
Ensure your TV and Fios Set-Top Box are turned on.
On your Verizon remote, press the Menu button.
Navigate to Settings.
Select Voice control (if applicable for voice remotes).
Choose Fios TV Voice Remote.
Select Program Voice Remote.
You may see options for Automatic Setup or Manual Setup.
Automatic Setup: Try this first. The system will attempt to auto-detect and configure your TV.
Manual Setup: If automatic fails, select Manual Setup.
Press OK to select.
Select your TV brand from the list provided.
Follow the on-screen instructions to complete the programming.
You should see a "Success" message in the upper right of your TV screen when the setup is complete.
Sub-heading: Method 2: Using the 3-Digit Code (for most Verizon Remotes)
This method is universal for many Verizon remotes and is essential if you don't have the on-screen menu option or if Method 1 doesn't work. You'll need to find a list of 3-digit codes for your TV brand. You can often find these in your remote's user manual or on the Verizon support website.
Turn on your TV and your Fios Set-Top Box.
Locate the 3-digit code for your TV brand. Keep this handy! (A quick online search for "Verizon Fios TV codes [Your TV Brand]" should yield results.)
On your Verizon remote, press and hold the "OK" button and the "TV" button simultaneously.
Release both buttons. The RED LED light on the remote will blink twice and then stay on. This indicates it's in programming mode.
Enter the 3-digit TV code you found in step 2 using the number pad on the remote.
The RED LED will blink twice and then stay on again, or it might blink three times and turn off, indicating success.
Test the remote:
Press the TV Power button on the remote. Your TV should turn off.
Press the TV Power button again to turn it back on.
Test the Volume Up (+) and Volume Down (-) buttons.
Test the Mute button.
Test the Input/Source button (if available on your remote).
If all functions work as expected, press OK to save the programming. The RED LED will blink three times and turn off.
If the remote doesn't work or only partially works, try the next code for your TV brand from the list, or proceed to the "Code Search Method."
QuickTip: Stop scrolling, read carefully here.
Step 4: Programming for Soundbars or Audio Receivers (AUX Mode)
If you have a soundbar or home theater system, you'll want your Verizon remote to control its volume. This often involves programming the "AUX" button.
Turn on your Soundbar/Audio Receiver and your TV/Fios Set-Top Box.
Locate the 3-digit code for your Soundbar/Audio Receiver brand.
On your Verizon remote, press and hold the "OK" button and the "AUX" button simultaneously.
Release both buttons. The RED LED light on the remote will blink twice and then stay on.
Enter the 3-digit AUX code for your audio device.
The RED LED will blink twice and then stay on, or three times and turn off, indicating successful code entry.
Test the remote:
Press the AUX button on the remote to switch to AUX mode.
Test the Volume Up (+), Volume Down (-), and Mute buttons. These should now control your soundbar/receiver.
If successful, press OK to save. The RED LED will blink three times and turn off.
If it doesn't work, try another code for your brand or the Code Search Method.
Sub-heading: Ensuring Volume Control Stays with AUX Device
Sometimes, even after programming AUX, your remote might revert to controlling TV volume. To ensure the volume buttons always control your AUX device:
Press and hold the STB button and the OK button together.
Release both keys. The RED LED will blink twice and stay on.
Press 9 - 5 - 5. The RED LED will blink twice and remain on.
Press the AUX button. The RED LED will blink 3 times and turn off. Now, your volume controls should always be routed through your AUX device regardless of the mode you're in.
Step 5: Code Search Method (When Codes Don't Work)
If you've tried all the listed codes for your brand and none of them work, the remote has a "Code Search" feature that scans its internal database for compatible codes. This method can take a bit longer.
Turn on the device you want to program (e.g., your TV).
On your Verizon remote, press and hold the "OK" button and the corresponding device button (e.g., TV, DVD, or AUX) simultaneously.
Release both buttons. The RED LED light on the remote will blink twice and then stay on.
Press 9 - 2 - 2. The RED LED will blink twice.
Point the remote at the device you're trying to program.
Press the "Power" button repeatedly, approximately once per second. Each press sends out a new power-off command.
Continue pressing the Power button until your device turns off.
As soon as the device turns off, STOP PRESSING THE POWER BUTTON IMMEDIATELY.
To confirm, press the Power button again. If the device turns on, you've found the correct code.
Press OK to save the code. The RED LED will blink three times and turn off.
If the device turns off and then you accidentally press the power button too many times and it turns back on, you can press the Channel Down (-) button to go back one code at a time until the device turns off again. Then, press OK to save.
Step 6: Programming the STB Power Button to Control TV & STB Simultaneously
Many users prefer to have a single power button turn both their TV and Fios Set-Top Box on or off.
Turn both your TV and Fios STB ON.
On your Verizon remote, press and hold the "OK" button and the "STB" button simultaneously.
Release both buttons. The RED LED light on the remote will blink twice and then stay on.
Press 9 - 7 - 7. The RED LED will blink twice and remain on.
Press the STB Power button. The RED LED will blink three times and then turn off.
Test: Press the STB Power button. Both your TV and Set-Top Box should turn off. Press it again, and both should turn on.
Troubleshooting Tips for Verizon Remote Programming
Check Batteries: A common culprit for remote issues is low or dead batteries. Replace them with fresh AA alkaline batteries.
Clear Line of Sight (for IR remotes): Ensure there are no obstructions between your remote and the device you're trying to control.
Too Much Time: If you don't press any buttons for 60 seconds during programming, the remote will automatically exit programming mode.
LED Flashing Rapidly: If the lights on the remote flash rapidly when you're trying to program, it usually means the programming attempt was not successful.
Factory Reset Remote: If all else fails, you can reset your remote to its original factory settings. This can sometimes clear any corrupted programming.
Press and hold the "OK" button and the "STB" button together, then release.
The RED LED will blink twice and then stay on.
Press 9 - 0 - 0. The remote should reset. You'll then need to re-program all your devices.
Consult Your Remote's Specific Manual: While this guide is comprehensive, each Verizon remote model might have slight variations. Your remote's manual is an invaluable resource.
Contact Verizon Support: If you've exhausted all options, Verizon's customer support can provide further assistance.
QuickTip: Use the post as a quick reference later.
Frequently Asked Questions (FAQs)
How to reset a Verizon Fios remote to factory settings?
To reset your Verizon Fios remote to factory settings, press and hold the "OK" and "STB" buttons together until the RED LED blinks twice and stays on. Then, enter the code "900". The LED will blink three times to confirm the reset.
How to program a Verizon Fios TV Voice Remote for the first time?
For a new Fios TV Voice Remote, simply pull the plastic battery tab. It should automatically attempt to pair with your Fios TV One. If not, point the remote at the Fios TV One, then press and hold the Play/Pause and "0" buttons simultaneously until the blue light flashes, then release.
How to find the correct 3-digit code for my TV brand?
You can usually find the 3-digit codes in your Verizon remote's user manual, on the Verizon support website (
How to make the Verizon remote control my soundbar's volume only?
After programming your soundbar to the "AUX" button, press and hold "STB" and "OK" together. Release, then press "955". Finally, press the "AUX" button. This locks the volume control to your AUX device regardless of the mode.
Tip: Stop when confused — clarity comes with patience.
How to program a Verizon remote without a code (Code Search Method)?
Turn on the device you want to program. Press and hold the "OK" button and the corresponding device button (TV/DVD/AUX) until the LED blinks twice and stays on. Press "922". Point the remote at the device and repeatedly press the "Power" button until the device turns off. Stop immediately and press "OK" to save.
How to program my Verizon remote to control both my TV and set-top box with one power button?
Turn on both your TV and Fios STB. Press and hold the "OK" and "STB" buttons simultaneously until the RED LED blinks twice and stays on. Enter "977". Then, press the "STB Power" button. The LED will blink three times, confirming the programming.
How to fix a Verizon remote that isn't responding?
First, replace the batteries. Ensure there's a clear line of sight if it's an IR remote. If it's a Voice Remote, try re-pairing it. You can also try a factory reset of the remote, then reprogram.
How to switch between controlling my TV and my Fios Set-Top Box?
On most Verizon remotes, you'll have dedicated "TV" and "STB" buttons. Simply press the corresponding button at the top of the remote to switch modes. When you press "Guide," "Menu," or "DVR," the remote usually automatically switches to STB mode.
How to tell if my Verizon remote is IR or RF?
IR remotes require a direct line of sight and often have dedicated "TV," "DVD," and "AUX" buttons. RF (Bluetooth) remotes, like the Fios TV Voice Remote, do not require line of sight, typically have a microphone button for voice commands, and often have a blue LED when pairing.
How to get more detailed troubleshooting or support for my Verizon remote?
Refer to the user manual that came with your specific Verizon remote model. If you still need assistance, visit the Verizon support website or contact Verizon customer service directly. They can often provide model-specific instructions and advanced troubleshooting.
 |
💡 This page may contain affiliate links — we may earn a small commission at no extra cost to you.
